HP Command View for Tape Libraries Software - Manual (Page 82)

7. Click the Performance tab.
The Performance page appears.
Figure 10 Drive Properties window Performance tab
Information provided on the Performance page is explained in Table 22 (page 82) .
Table 22 Information available from the Drive Properties window Performance tab
Description Item
Data Transfer
The estimated transfer rate of the host averaged over
the data transferred to/from the tape since the last load. Estimated Host Transfer Rate
The actual, measured native transfer rate with that drive
and tape. Media Transfer Rate
The Maximum Media Transfer Rate is determined by
the drive type and represents the maximum native
transfer rate specified for that drive type. Maximum Media Transfer Rate
Compression
The average write compression ratio of the data written
to tape since the last load. Write Compression Ratio
The average read compression ratio of the data read
from tape since the last load. Read Compression Ratio
8. Click the Usage tab.
The Usage page appears.
82 Command View TL GUI