Set system contact phone, Set system name, Set system contact pager – HP Command View for Tape Libraries Software User Manual
Page 220

Examples
To set the system contact name to myfirstname_mylastname:
/>set system contact name myfirstname_mylastname
Committing configuration...done
See also
set system contact pager
Description
Sets the system contact pager number.
Syntax
set system contact pager number
Availability
All users and modes
Operands
Specify the system contact pager number. The system contact pager
number can include alphanumeric characters, dashes, periods, or
the ‘_’ character. This operand is required.
number
Examples
To set the system contact pager number to 444-444-4444:
/>set system contact pager 444-444-4444
Committing configuration...done
See also
set system contact phone
Description
Sets the system contact phone number.
Syntax
set system contact phone number
Availability
All users and modes
Operands
Specify the system contact phone number. The system contact
phone number can include alphanumeric characters, dashes,
periods, or the ‘_’ character. This operand is required.
number
Examples
To set the system contact phone number to 444-444-4444:
/>set system contact phone 444-444-4444
Committing configuration...done
See also
set system name
Description
Sets the system name.
Syntax
set system name system_name
Availability
All users and modes
Operands
Specify the name of the tape library. The tape library name
can contain letters, numbers, and '_' characters. The
system_name
maximum length for a tape library name is 19 characters
This operand is required.
Examples
To set the system name to my_system:
/>set system name my_system
Committing configuration...done
See also
220 CLI Command Reference