HP Command View for Tape Libraries Software - Manual (Page 52)

Table 14 Overview tabular view tool tips for column headers (continued)
Tool Tip Column Header
Number of frames (modules) Frames/Modules
Number of partitions Library Partitions
The time at which the last sample was taken Last Sample Time
Partition tabular view
By default when the Overview tabular view is displayed the first library is highlighted and the
partition tabular view for the corresponding library is display below. By clicking on particular row
of the Overview table, the corresponding partition for the selected library gets displayed in the
partition table.
NOTE: If there is no partition available for the selected library, a message is displayed stating:
Partition data is not available for the selected library.
Table 15 (page 52) shows the tool tips for the Overview tabular view dialog box.
Table 15 Partition tabular view tool tips for column headers
Tool Tip Column Header
Serial number of the partition Partition Serial Number
Partition number of the library Library Partition Number
Encryption configuration: Encryption Config
• Library managed (off) PLK Midrange Encryption Control
Token
•
Library managed ESKM (HP Enterprise Secure Manager)
• Library managed KMIP (Key Management
Interoperability Protocol)
•
Application managed
Control path failover configuration: Control Path Failover
• Basic (off) — The MSL tape libraries provide a basic
control path failover capability
•
Advanced — The HP ESL G3 tape libraries provide an
advanced library control path failover
Number of drives in the partition Number of Drives
52 Command View TL GUI