Show drive info, Show drive interface, Show drive info show drive interface – HP Command View for Tape Libraries Software User Manual

Page 222

show drive type

show interface info

show drive info

Description

Shows all information pertaining to one or more tape drives. This information
includes the tape drive status.

Syntax

show drive info [drive_num] | [all]

Availability

All users and modes

Operands

Specify a tape drive that will have its information appear. The
information may be displayed for all tape drives by specifying
all

for this operand. This operand is required.

drive_num

Examples

To show all information for all tape drives:

/>show drive info all
Tape Drive status:
Drive Number Name Status
------------ -------------------- --------
Drive 1 drive 1 Green
Drive 2 drive 2 Green

********************************************************
Access information for drive 1:
Host Host Name WW Node Name LUN Port
-------- ---------------------- -------------------- --- ---
none none none N/A N/A

Access information for drive 2:
Host Host Name WW Node Name LUN Port
-------- ---------------------- -------------------- --- ---
none none none N/A N/A

********************************************************
Tape drive interface information:
Drive Number Interface Card Name Interface WW Node Name
------------- -------------------- --------------------
Drive 1 100000e00202733b 100000e00202733b
Drive 2 100000e00202733b 100000e00202733b

********************************************************
Tape drive product ID:
Drive Number Serial Number Name Product ID
------------ -------------------- --------------- ----------------
Drive 1 HU72M09609 drive 1 Ultrium 1-SCSI
Drive 2 HU72M09608 drive 2 Ultrium 1-SCSI

********************************************************
Tape Drive firmware revision:
Drive Number Name Revision
------------ -------------------- --------
Drive 1 drive 1 E33W
Drive 2 drive 2 E33W