Show interface wwninfo, Show library access, Show library info – HP Command View for Tape Libraries Software User Manual
Page 234
/>show interface status all
Interface status:
Firmware Has
Interface Card WW Node Name Status State Mismatch Errors
----------------- ---------------- ------ ------- -------- --------
Interface Card 1 bb5ea468bb5ea354 Green Online No No
Interface Card 2 bb4ff343236bc023 Yellow Offline Yes Yes*
*Use the command 'show interface status' with a specific interface number to see
specific errors for this device.
See also
show interface wwninfo
Description
Shows the World Wide Name (WWN) information for the requested interface
controller or controllers. All WWN information shown is for the node name/ID.
Syntax
show interface wwninfo interface_num
Availability
All users and modes
Operands
Specify the number of the interface. The value may be
changed for all interfaces by specifying all for this
operand. This operand is required.
interface_num
Examples
To show WWN info for all controllers:
/>show interface wwninfo all
Interface Card Current WW Name Factory WW Name Mismatch
------------------- ------------------- ------------------- --------
Interface 1 100000e0f202ed73 100000e00202ed71 no
Interface 2 100000e0720309e3 100000e0020309eb yes
See also
set interface clearwwnmismatch
show library access
Description
Shows which hosts have access to the tape library. For each host, the target
LUN that gives the host access to the library is shown.
Syntax
show library access
Availability
All users and modes
Operands
None
Examples
To show tape library access information:
/>show library access
Access information for the tape library:
Host Host Name WW Node Name LUN Port
-------- -------------------- -------------------- --- ---
1 myhost1 FFFFFFFFFFFFFFFFFFFF 1 1
See also
show library info
Description
Shows all information pertaining to the tape library.
Syntax
show library info
Availability
All users and modes
Operands
None
Examples
To show all information for the tape library:
/>show library info
All tape library information
Tape library name: picker
Tape library firmware status: Green
Tape library product ID: ESL9322
Tape library serial number: 2G33KZ85H002
234 CLI Command Reference