HP Command View for Tape Libraries Software - Manual (Page 219)

show supportticket statistics
set system contact assetnumber
Description Sets the system asset number.
Syntax set system contact assetnumber ID
Availability All users and modes
Operands Specify the system asset number. The system asset number must only be
composed of letters and numbers. Its maximum length is 63 characters.
This operand is required. ID
Examples To set the system asset number to 123456ABCD:
/>set system contact assetnumber 123456ABCD
Committing configuration...done
See also show system contact assetnumber
set system contact email
Description Sets the system contact e-mail address.
Syntax set system contact email address
Availability All users and modes
Operands Specify the system contact e-mail address. The e-mail address
must conform to the e-mail address format specified in RFC 821.
This operand is required. address
Examples To set the system contact e-mail address to [email protected]:
/>set system contact email [email protected]
Committing configuration...done
See also show system contact email
show system contact name
set system contact location
Description Sets the system location.
Syntax set system contact location location
Availability All users and modes
Operands Specify the system location. The system location must only be
composed of letters, and numbers. Its maximum length is 63
characters. This operand is required. location
Examples To set the system location to my_system_location:
/>set system contact location my_system_location
Committing configuration...done
See also show system contact location
set system contact name
Description Sets the system contact name.
Syntax set system contact name new_name
Availability All users and modes
Operands Specify the system contact name. The system contact name must
only be composed of letters, numbers, and the '_' character. Its
maximum length is 19 characters. This operand is required. new_name
set system contact assetnumber 219