HP Command View for Tape Libraries Software - Manual (Page 226)

Examples To show the available firmware files and revisions:
/>show firmware available
Firmware Revision VendorId ProductID
----------------- ----------- -----------
i100 HP INTRFC-MGR01
1.05 HP NS E2400-160
E36R HP Ultrium 1-SCSI
See also show firmware revisions
show firmware revisions
Description Shows the current firmware revisions installed in the Interface Manager card
and FC interface controllers.
Syntax show firmware revisions
Availability All users and modes
Operands None
Examples To show the current firmware revisions:
/>show firmware revisions
Current Firmware Revisions
Overall firmware revision: 2.00.0
Interface manager firmware revision: 1.01
Tape library firmware revision: 3.456
Tape drive firmware revision:
Drive Number Firmware Revision
---------------- -----------------
Drive 1 AEFF
Drive 2 AEFF
Drive 3 AEFF
Drive 4 AEFF
Drive 5 AEFF
Drive 6 AEFF
Drive 7 AEFF
Drive 8 AEFF
Interface firmware revision:
Interface Number Firmware Revision
---------------- -----------------
1 2.02
2 2.02
3 2.02
4 2.02
See also show firmware available
show host access
Description Shows which tape drives all hosts have access to. For each tape drive, the
LUN to which the host or hosts have access is displayed.
Syntax show host access
Availability All users and modes
Operands None
Examples To show host access information for the hosts:
/>show host access
Access information for host 1 (WWNN: 1111111111111111) :
Device Port LUN Partition
--------- ---- --- ---------
Library 0 0 Partition 1
Drive 1 0 0 Partition 1, Drive 1
Drive 2 0 1 Partition 1, Drive 2
Drive 3 1 0 Partition 1, Drive 3
Drive 4 1 1 Partition 1, Drive 4
See also show host info
show interface access
226 CLI Command Reference