HP Command View for Tape Libraries Software - Manual (Page 53)

Table 15 Partition tabular view tool tips for column headers (continued)
Tool Tip Column Header
Number of slots in the partition Number of Slots
Number of mail slots in the partition Number of Mail Slots
Usage tabular view
The Library TapeAssure Usage tabular view displays information for all the libraries for which the
Library TapeAssure information is available in the CVTL MS database.
To launch the Usage Tabular Data, go to TapeAssure
→Libraries→Usage and click on the Usage
node.
If there is no data, then a message is displayed stating:
Library Usage data is not available or libraries are using an older
firmware. Please upgrade firmware for the appropriate tape libraries.
Table 16 (page 53) shows the tool tips for the Usage tabular view dialog box.
Table 16 Usage tabular view tool tips for column headers
Tool Tip Column Header
The HP serial number of the library (for support use) Library SN
Description of the library Library Description
Hostname of the library Library Hostname
Total number of moves over the lifetime of the library Moves
Total number of power cycles in the library Library Power Cycles
Total time the library was powered on Library Total Power on Time
Power on time since the last power cycle Library Current Power on Time
The time at which the last sample was taken Last Sample Time
NOTE: Library TapeAssure features are supported for the MSL G3, ESL G3, and MSL 6480
libraries only.
Empty slots per library
The library empty slots data chart is displayed under the Libraries link in the TapeAssure tab. The
Library empty slots information is displayed in both a tabular and graphical view. The graphical
Using TapeAssure 53