beautypg.com

HP Command View for Tape Libraries Software User Manual

Page 13

background image

Figure 2 Network configuration for EML E-Series tape libraries

2. FC switch

1. Hosts

4. Interface Manager card

3. FC interface controllers (up to four)

6. Library robotics controller

5. LTO2 and LTO3 tape drives

8. Operator control panel

7. Robot

10. Telnet connection

9. Serial connection

12. Library boundary

11. Management station

14. Internal network switch (LTO4 and LTO5 libraries only)

13. LTO4 and later tape drives

Network configuration overview

13

This manual is related to the following products:
See also other documents in the category HP Storage: