HP Command View for Tape Libraries Software User Manual
Page 89
At the top of the dialog box, above the tabs, the following information appears:
Table 25 Information available from the LTO Tape Properties dialog box
Description
Item
Identifies the tape cartridge ID and media format.
Tape identification
The current status of the drive.
Health
Identifies the tape by serial number and barcode.
Cartridge ID
Identifies the data format supported by the tape.
Media Format
Identifies the most recent drive in which the tape was
used.
Last Used Drive
The time at which the last sample was taken.
Last Sample Time
This information remains visible when any tab is selected.
6.
Click the Overview tab to view the general information about the selected tape.
Table 26 Information available from the LTO Tape Properties window Overview tab
Description
Item
Status
For tapes in libraries, this column displays the serial
number of that library. For tapes being used by
Library Serial Number
standalone drives, this column shows the hostname of
the server to which the drive is attached. Such hostname
entries are highlighted with an asterisk (*).
Indicates whether the tape is in a drive or not.
In Drive?
Identity
The external barcode on the tape cartridge.
Barcode
Using TapeAssure
89