HP Command View for Tape Libraries Software - Manual (Page 240)

Device State Ready
Description Operational
See also show mgmt log event
show mgmt log event
Description Displays the event log. Information for each event is summarized. To see
additional details about a specific event, see
show mgmt log detail .
Syntax show mgmt log event [noprompt]
Availability All users and modes
Operands An optional parameter; when noprompt is specified, the
output will run continuously, rather than pausing after 20
items have been displayed. [noprompt]
Examples To show the event log:
/>show mgmt log event
Evt# Timestamp (GMT) Severity Source Description
----- -------------------- --------- ----------- -------------------------
10018 Jul 14 22:56:28 2009 Warning Library Test unit ready status...
10017 Jul 14 22:56:18 2009 Info Library Director - auditRespons...
-> Hit for Next Page, q to Quit:
See also show mgmt log detail
show mgmt revision
Description Shows the Interface Manager card firmware revision.
Syntax show mgmt revision
Availability All users and modes
Operands None
Examples To show the current Interface Manager card firmware revision:
/>show mgmt revision
Interface manager firmware revision: 1.01
See also show mgmt info
show mgmt status
Description Shows the Interface Manager card status.
Syntax show mgmt status
Availability All users and modes
Operands None
Examples To show the current Interface Manager card status:
/>show mgmt status
Interface manager status: Good
See also show mgmt info
show mgmt timezone
Description Shows the Interface Manager card time zone.
Syntax show mgmt timezone
Availability All users and modes
Operands None
Examples To show the Interface Manager card time zone:
/>show mgmt timezone
Interface manager time zone: America/Denver (MST)
240 CLI Command Reference