HP Command View for Tape Libraries Software - Manual (Page 224)

drives by specifying all for this operand. This operand is
required.
Examples To show the firmware revision for all tape drives:
/>show drive revision all
Tape drive firmware revision:
Drive Number Firmware Revision
---------------- -----------------
Drive 1 AEFF
Drive 2 AEFF
See also show drive access
show drive info
show drive interface
show drive productid
show drive serialnumber
show drive status
show drive type
show interface info
show drive serialnumber
Description Shows the serial number of one or more tape drives.
Syntax show drive serialnumber [drive_num] | [all]
Availability All users and modes
Operands Specify a tape drive for which to display the serial number.
The tape drive serial number may be displayed for all tape drive_num
drives by specifying all for this operand. This operand is
required.
Examples To show the serial number for all tape drives:
/>show drive serialnumber all
Tape drive serial number:
Drive Number Serial Number
---------------- ----------------
Drive 1 222222222222
Drive 2 333333333333
See also show drive access
show drive info
show drive interface
show drive productid
show drive revision
show drive status
show drive type
show interface info
show drive status
Description Shows the status of one or more tape drives.
Syntax show drive status [drive_num] | [all]
Availability All users and modes
224 CLI Command Reference