HP Command View for Tape Libraries Software - Manual (Page 117)

NOTE: The partition name is automatically assigned as “DVP” and cannot be changed.
The wizard does not support creating a mixed mode of LTO5 and LTO6 drives on one library.
However, you can create this using the ESL G3 Library Management Console.
7. Click Next.
8. Enter the number of drives, storage slots, and I/E slots the partition will use. The quantity
available is provided.
9. Click Next.
10. Confirm your selections and click Finish. A success message is shown when the data verification
partition is created.
Using data verification 117