HP StorageWorks XP10000 Disk Array - Manual (Page 99)

indicates an expanded (LUSE) volume.
indicates a reserved volume.
indicates a variable sized volume (VLL, or customized volume).
indicates that the security is set for the volume.
indicates a remote command device
indicates a command device.
indicates a secured command device.
• Emulation: Emulation type
• Capacity: Volume capacity
• RAID: RAID level
• HDD Type: The type of the hard disk is displayed as follows:
• An asterisk (*) indicates HD-FC drive.
• The blank indicates internal volume.
• Parity Group: Parity Group
• Paths: Number of paths
• VMA: The information indicates whether VMA is set or not, as follows:
An asterisk (*) indicates that the VMA is set.
An asterisk with the string "Ext" in the parentheses (* (Ext) ) indicates that extents and VMA are set.
The blank indicates that the VMA is not set.
• Attribute: The attribute set for the volume is displayed as follows:
Pool (X): The volume is set as a pool volume (pool-VOL). X indicates pool ID.
V-VOL: The volume is set as a virtual volume (V-VOL).
Reserved LDEV: The volume is set as a reserved volume of XP Auto LUN.
JNL Volume: The volume is set as a journal volume.
• External Device Information: External volume information is displayed as Vendor/Product
name/Serial number/ Hard disk type. The hard disk type is displayed as follows:
• An
asterisk (*) indicates BD, SATA, or HD-FC drive.
• The blank indicates internal volume.
• IO Suppression Mode: IO Suppression mode set for the external volume when it was mapped
• Cache Mode: Cache Mode set for the external volume when it was mapped.
Displaying the Detailed Information on LUSE Volume Selected in the Basic Information
Display Pane
If you select a LUSE volume from either the LUN pane (see Figure 62 ) or the LDEV pane (see Figure 63 )
and right-click, the Detail Information command is displayed. Selecting the Detail Information command
will display the Detail Information pane (see Figure 64 ).
HP StorageWorks 99