HP StorageWorks XP10000 Disk Array - Manual (Page 137)

Figure 96 Add Community Pop-Up Menu
Figure 97 Add Community Pane
Deleting a Community Name
To delete a community name:
1. Change to Modify mode.
2. Click Install (
3. Click the SNMP IP Security tab.
4. In the Community & Trap box, select and then right-click the unwanted community. The Delete
Community popup menu is displayed (see Figure 98 ).
5. Select the Delete Community command. A confirmation message is displayed.
6. Click OK to delete, or click Cancel to cancel the operation. The selected community is deleted from
Community & Trap, but the setting is not yet implemented in the array.
7. If you want to apply the changes to the array, click Apply. Click OK.
).
HP StorageWorks 137