HP StorageWorks XP10000 Disk Array - Manual (Page 77)

NOTE:
A storage partition administrator can view the Identity pane, but cannot change anything.
Figure 46 Device Information Box and Device View
•
Serial Number: Serial number of the connected array
• IP Address: IP address of the connected array (SVP)
• Device Name: Device name of the connected array. This can be changed if you are in Modify
mode. This is a required field (maximum 180 alphanumeric characters).
NOTE:
Do not add a space before or after the device name or an error will occur when you click Apply.
Also, do not use the following symbols: ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, or %.
NOTE:
The device name is required to use SNMP Agent. Be sure to document the device name
because the settings are cleared if the SVP is replaced. For more information on SNMP, see
“ Setting SNMP Agent Properties ” on page 131.
• Contact: Device support contact information, such as personnel and telephone numbers, where
you can inquire about the connected array. You can change the contact information in Modify
mode. This is a required field (maximum 180 alphanumeric characters). Do not use the following
symbols: ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, or %. For more information on SNMP, see
“ Setting SNMP Agent Properties ” on page 131.
NOTE:
The contact name is required to use SNMP Agent. Be sure to document the contact name because
the settings are cleared if the SVP is replaced.
• Device Location: Location of the connected array. The XP Remote Web Console user can change
the device location when in Modify mode. This is a required field (maximum 180 alphanumeric
characters). Do not use the following symbols: ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, or %. For more
information on SNMP, see “ Setting SNMP Agent Properties ” on page 131.
• Firmware Version Main: Version of the microcode installed in the connected array.
• Firmware Version SVP: Version of the XP Remote Web Console Java™ applet program installed
in the SVP of the connected array.
• Firmware Version Server: Version of the RMI™ server installed in the SVP of the connected array.
• Device View: Product name and visual image (picture) of the connected array.
HP StorageWorks 77