HP StorageWorks XP10000 Disk Array - Manual (Page 152)

Table 19 LUN Manager Spreadsheet Format
Column Function Tag
[CHA] [Port] [Host-
Group]
[WWN] [LUN] [LDEV]
1st CHA Port Port Port Port CU
2nd PCB Mode Security
Switch
Group ID Group ID Group ID LDEV
3rd Blank AL-PA Name WWN LUN Command
Device
4th Blank Fabric Host mode Name CU Command
Device
Security
5th Blank Connection Host mode
option
Blank LDEV Blank
6th Blank Channel
speed
Blank Blank Blank
7th Blank
8th Blank
9th Blank
10th Blank
11th CHA Port Port Port Port CU
12th PCB Mode Security
Switch
Group ID Group ID Group ID LDEV
13th Blank AL-PA Name WWN LUN Command
Device
14th Blank Fabric Host mode Name CU Command
Device
Security
15th Blank Connection Host mode
option
Blank LDEV Blank
16th Blank Channel
speed
Blank Blank
NOTE:
When the LUN Manager spreadsheet is exported, the settings are written up to the 10th column
(blank column).
For detailed information on LUN Manager, including the available values and the relationships between
each function, see the HP StorageWorks XP LUN Configuration and Security Manager user guide. LUN
Manager spreadsheets must conform to those parameters.
Setting the CHA Mode
The [CHA] tag allows you to set the channel adapter mode. The [CHA] tag is available only for changing
settings. You cannot add or delete the settings with the [CHA] tag definitions. Mainframe settings are not
written on the exported spreadsheet.
You cannot change the NAS settings using the spreadsheet. However, the current NAS settings are
commented on the exported spreadsheet (the rows start with “#$”).
152 Configuration File Loader