HP StorageWorks XP10000 Disk Array - Manual (Page 168)

Figure 119 Second Error Check Flow Chart
Third Error Check
The third check is performed after you click Apply. Errors detected at this third check include the following:
• There is no difference between the current configuration definition and the configuration definition
on the imported spreadsheet. The spreadsheet is accepted, but no operation will be performed.
• You are trying to delete a LUN that is needed to process input/output (I/Os).
The errors caused by other factors are detected by the second check as the logical errors of the settings.
However, there could be an instance where the current settings are changed even though you are in
Modify mode. In this case, an error occurs during the third check.
Implementing the Changes
If no errors are found on the third error check, the settings in the spreadsheet are applied to the XP array.
168 Configuration File Loader