License install box, Figure 33 – HP StorageWorks XP10000 Disk Array User Manual

Page 57

Figure 33 License Install Box

The License Install box has the following features:

•

Mode allows you to click one of the following buttons: Key Code, File, or Available.

•

Key Code enables the Key Code box, which allows you to en

ter the license key for the selected option to be installed (see

NOTE:

You cannot copy and paste text from other applications.

• Click

File to enable the File Name box and the Refer button. This

allows you to enter the name of the desired license key ﬁle (see

you click Refer, the pane that allows you to select the license key ﬁle appears. Select the

desired license key ﬁle on the displayed pane, and then enter the license key ﬁle name

in the File Name text box.

• Click

Available to install available options automatically with the permanent keys. The

Available button can only be used when the licensed capacity exceeds the mounted (or used)

capacity because the disk drives are reduced.

The radio buttons on the lower right of the License Install box affect the display of the options in the

License Key table as follows:

•

Only Normal displays successfully installed options. This is the default.

NOTE:

This will also display options that are installed but have insufﬁcient licensed capacity.

•

Only Normal & Warning displays both successfully installed options and the following failed

options:
• Installing an emergency key for the option that has already been installed with a permanent key
• Insufﬁcient licensed capacity

•

All Normal displays options only if all options have been successfully installed. If installation of

any of the options failed, no option is displayed.

NOTE:

This will also display options that are installed but have insufﬁcient licensed capacity.

The buttons on the lower right of the License Key pane are used to install and uninstall options (see

HP StorageWorks

This manual is related to the following products: