HP XP P9500 Storage User Manual
Page 86
Return value
Cause of error and action
Error message
Error code
131
Either of the following causes is possible.
Argument too long.
Please refer to the help.
EW_LNGARG
•
The length of a parameter of the
command exceeds 256 bytes.
•
The length of all the parameters of the
command exceeds 1,021 bytes.
See
Report Configuration Tool command
reference (raidinf commands) (page 115)
and specify a new parameter.
131
The maximum number of Savable that you
can connect simultaneously is exceeded. Log
out of unnecessary SVPs and reconnect.
Maximum application start.
Please check starting application.
EW_MAXAPP
131
The number of parameters of the command
exceeds 10. See
Maximum argument.
Please refer to the help.
EW_MAXARG
command reference (raidinf commands)
(page 115)
and specify a new parameter.
131
The required option and parameters were
not entered. See
Required option list.
Please refer to the help.
EW_REQOPT
command reference (raidinf commands)
(page 115)
and specify a valid option and
parameters.
131
An internal error occurred. Contact HP
Technical Support.
System error.
Please call to service center.
EW_SYSERR
131
The installation path exceeds 240 bytes.
Specify no more than 240 bytes.
Install path is too long.
Specify the install path with up to
240 bytes.
EW_SYSERR
131
Updating certificate file fails. Contact HP
Technical Support.
Certificate file invalid.
Please call to service center.
EW_SYSERR
131
The installation directory includes a file that
will overlap with another file to be created
The file is illegal.
Please move 'raidinfcer' file from
the installation directory.
EW_SYSERR
by the Report Configuration Tool and the
Report Configuration Tool cannot start.
Remove the overlapping file from the
installation directory.
131
The log file cannot be accessed. Contact HP
Technical Support.
Log file invalid.
Please call to service center.
EW_SYSERR
230
The syntax of the command is not valid. See
Report Configuration Tool command
Unknown command.
Please refer to the help.
EW_UNWCMD
reference (raidinf commands) (page 115)
and enter a valid parameter.
252
The option and parameter are not valid. See
Report Configuration Tool command
Unknown option.
Please refer to the help.
EW_UNWOPT
reference (raidinf commands) (page 115)
and input a new option and parameter.
252
Unable to connect to the proxy server
specified by the environment variable. Check
the proxy server name.
Invalid environment value.
Please confirm the setting of
HTTP_PROXY.
EW_UNWOPT
131
An internal error occurred while connecting
to the server. Check the setting of the server.
Web access error.
Please confirm the setting of server.
EW_WEBERR
86
Viewing and managing the storage system