HP XP P9500 Storage - Manual (Page 198)

Setup Server table
Description Item
Displays whether to search for the Kerberos server using the information registered in
the SRV records in the DNS server. DNS Lookup
•
Enable: Performs the search using information registered in the SRV records in the
DNS server.
• Disable: Performs the search using the host name and the port number.
Displayed the default realm name. Realm Name
Displays the name of the Kerberos server. Primary Host Name
Displays the port number of the Kerberos server. Primary Port Number
Displays the acceptable range of time difference between the SVP and the Kerberos
server. Clock Skew
Displays the number of seconds before connection to the Kerberos server times out. Timeout
Displays the name of the secondary Kerberos server. Secondary Host Name
Displays the port number of the secondary Kerberos server. Secondary Port Number
Displays the certificate file. External User Group
Mapping - Certificate File
Name
Displays the LDAP protocol to use. External User Group
Mapping - Authentication
Protocol
Displays the port number of the LDAP server. External User Group
Mapping - Primary Port
Number
Specify a base DN to search for users to authenticate. External User Group
Mapping - Base DN
Available characters: Alphanumeric characters (ASCII characters) and all symbols.
• Hierarchical model
Specify a DN of hierarchy that includes all the targeted users for searching.
•
Flat model
Specify a DN of hierarchy that is one level up of the targeted user for searching.
You can enter alphanumeric characters and all symbols. Note, however, that when you
enter symbols like the following, you need to use a backslash to escape for each symbol:
+ ; , < = > \ / "
In some cases, you may need to use a backslash and an ASCII character to escape.
•
\ -> \5c (hexadecimal)
• / -> \2f (hexadecimal)
•
"-> \22 (hexadecimal)
Search for a user by specifying a DN External User Group
Mapping - Search User's DN Available characters: Alphanumeric characters (ASCII characters) and all symbols.
If you specify sAMAccountName in External User Group Mapping - User Name Attribute,
or if you select Enable in External User Group Mapping, this item must be specified.
If you select Disable in External User Group Mapping, this item is disabled.
You can enter alphanumeric characters and all symbols. Note, however, that when you
enter symbols like the following, you need to use a backslash to escape for each symbol:
+ ; , < = > \ / "
198 Remote Web Console GUI reference (main window)