HP XP P9500 Storage - Manual (Page 106)

Table 34 Logical Devices report
Description Item
The logical volume number. LDEV ID
The logical volume name. LDEV Name
Capacity of the logical volume. Capacity (MB)
Emulation type of the logical volume. Emulation Type
Resource group name where LDEV belongs. Resource Group Name
Resource group ID where LDEV belongs. Resource Group ID
The parity group number. PG
•
If the number starts with "E" (for example, E1-1), the parity group contains
external volumes.
•
If the number starts with "M" (for example, M1-1), the parity group
contains FICON DM volumes.
RAID level of the parity group where the logical volume belongs. RAID Level
Drive type and round-per-minute (RPM) of the drive of the parity group where
the logical volume belongs. Drive Type/RPM
A hyphen (-) is displayed as RPM when the drive is SSD.
Type code of the drive of the parity group where the logical volume belongs. Drive Type-Code
Capacity of the drive of the parity group where the logical volume belongs. Drive Capacity
List of the drive locations of the parity group where the logical volume
belongs. PG Members
Information about whether the host can access the logical volume. Allocated
For mainframe volumes and multi-platform volumes, “Y” is displayed unless
the volumes are in the reserved status.
For logical volumes of a LUSE volume, “Y” is displayed if the LU path is
defined to the LUSE volume.
SSID of the logical volume. SSID
Information about whether the logical volume is a customized volume. CVS
Oracle checksum. OCS
Information about whether the logical volume is a part of a LUSE volume. LUSE
“On” is displayed when the logical volume is the first volume of a LUSE
volume.
“Off” is displayed when the logical volume is the second or later volume
of a LUSE volume, or not a part of a LUSE volume.
The attribute of the logical volume. Attribute
Provisioning type of the logical volume. Provisioning Type
Pool Name • If the provisioning type" is Thin Provisioning, the name of the pool related
to the logical volume is displayed (see Note below).
•
If the logical volume attributes Pool, the name of the pool where the
logical volume belongs is displayed.
• When neither of the above are displayed, the pool name is blank.
The ID of the pool. Pool ID
The number of the microprocessor that currently controls the logical volume. Current MPB
106 Storage configuration reports