HP XP P9500 Storage - Manual (Page 217)

The LDEV dialog box provides information about volumes.
Description Item
Choose which information to display in the LDEV list. CU or PG
•
If you select LDKC:CU, two lists are available. You can select an LDKC from the list on the
left, and a CU from the list on the right.
•
If you select PG, one list is available. You can select the parity group to display from the list.
Displays the CLPR number and CLPR name. CLPR
The LDKC number, the CU number, and the LDEV number. For details about icons, see Icons in
the LDEV ID column (page 214)
LDEV ID
Displays the emulation type. Emulation Type
For an expanded (LUSE) volume, the emulation type of each LDEV is available.
Displays the LDEV size recognized by a host. MAX LBA
Displays volume capacity. Open-system volumes are displayed in gigabyte (GB); mainframe
volumes are displayed in cylinder (Cyl). For an expanded (LUSE) volume, the capacity of each
LDEV is available. Capacity
Displays the RAID level. RAID Level
Displays the data protection level. Protection
•
SATA-W/V: Write and Verify method on SATA drives.
•
SATA-E: Enhancing method on SATA drives.
• Standard: SAS drives, SSD, external volumes, or virtual volumes (V-VOLs).
Displays the hard disk type of internal volume as follows: Internal Volume
Information
• Blank indicates SAS drive.
•
An asterisk (*) indicates SATA drive.
•
The dollar sign ($) indicates SSD.
• A hyphen (-) indicates external volume.
Displays the parity group. Parity Group ID
Indicates if the volume is encrypted or not. Encryption
• Enable: The volume is encrypted.
•
Disable: The volume is not encrypted.
•
A hyphen (-) appears when the volume is not an internal volume.
Displays the number of LU paths. Number of Paths
The attribute set for the volume as follows: Attribute
•
Pool (X) : The volume is set as a pool volume (pool-VOL); where X indicates pool ID.
• V-VOL: The volume is set as a virtual volume (V-VOL) for Fast Snap or Snapshot.
•
THP V-VOL: The volume is set as a virtual volume (V-VOL) for Thin Provisioning.
•
Reserved LDEV: The volume is set as a reserved volume of Auto LUN.
• JNL Volume: The volume is set as a journal volume.
•
System Disk: The volume is set as a system disk.
• Quorum Disk: The volume is set as a quorum disk.
•
Online Data Migration: The volume is set as a non-disruptive migration volume
Report Display dialog box 217