HP XP P9500 Storage - Manual (Page 192)

Description Item
Displays asterisks (*) to mask the RADIUS secret key used for the PAP authentication or
the CHAP authentication. Secret
Displays the identifier for the RADIUS server to find SVP. NAS Address
Displays the port number of the RADIUS server. Primary Port Number
Displays the number of seconds before connection to the RADIUS server times out. Timeout
Displays the retry times when the connection to the RADIUS server fails. Number of Retries
Displays the name of the secondary RADIUS server. Secondary Host Name
Displays the port number of the secondary RADIUS server. Secondary Port Number
Displays the certificate file. External User Group
Mapping - Certificate File
Name
Displays the LDAP protocol to use. External User Group
Mapping - Authentication
Protocol
Displays whether to search for the LDAP server using the information registered in the
SRV records in the DNS server. External User Group
Mapping - DNS Lookup
•
Enable: Performs the search using information registered in the SRV records in the
DNS server.
•
Disable: Performs the search using the host name and the port number.
Displays the host name of the LDAP server. External User Group
Mapping - Host Name
Displays the port number of the LDAP server. External User Group
Mapping - Port Number
Displays the domain name of the LDAP server. External User Group
Mapping - Domain Name
Specify a base DN to search for users to authenticate. External User Group
Mapping - Base DN
Available characters: Alphanumeric characters (ASCII characters) and all symbols.
•
Hierarchical model
Specify a DN of hierarchy that includes all the targeted users for searching.
• Flat model
Specify a DN of hierarchy that is one level up of the targeted user for searching.
You can enter alphanumeric characters and all symbols. Note, however, that when you
enter symbols like the following, you need to use a backslash to escape for each symbol:
+ ; , < = > \ / "
In some cases, you may need to use a backslash and an ASCII character to escape.
• \ -> \5c (hexadecimal)
•
/ -> \2f (hexadecimal)
• "-> \22 (hexadecimal)
Search for a user by specifying a DN External User Group
Mapping - Search User's DN Available characters: Alphanumeric characters (ASCII characters) and all symbols.
If you specify sAMAccountName in External User Group Mapping - User Name Attribute,
or if you select Enable in External User Group Mapping, this item must be specified.
If you select Disable in External User Group Mapping, this item is disabled.
You can enter alphanumeric characters and all symbols. Note, however, that when you
enter symbols like the following, you need to use a backslash to escape for each symbol:
+ ; , < = > \ / "
192 Remote Web Console GUI reference (main window)