HP XP P9500 Storage - Manual (Page 122)

The CipherSuites parameter can use any of the following values:
•
SSL_RSA_WITH_RC4_128_SHA
•
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
•
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
•
TLS_RSA_WITH_AES_128_CBC_SHA
•
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
•
SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
•
SSL_RSA_WITH_3DES_EDE_CBC_SHA
Setting up the CipherSuites parameter
Connect cipher suites with a comma (,) as a delimiter.
Example
CipherSuites=SSL_RSA_WITH_RC4_128_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,
TLS_DHE_DSS_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA,
SSL_RSA_WITH_3DES_EDE_CBC_SHA
VVolForSnapshot parameter
Use the VVolForSnapshot parameter to specify virtual volumes that the SMI-S provider can use
when you operate Fast Snap or Copy-on-Write Snapshot from CreateElementReplica of the
ReplicationService.
All virtual volumes are specified by default.
Setting up the VVolForSnapshot parameter
Set up the parameter by using and with a comma (,) as a
delimiter:
•
: Specifies a range of virtual volumes
•
: Specifies a single virtual volume
format
::to::
•
: LDKC number (two-digit hexadecimal) of the first virtual volume in the specified
range
•
: CU number (two-digit hexadecimal) of the first virtual volume in the specified
range
•
: LDEV number (two-digit hexadecimal) of the first virtual volume in the specified
range
•
: LDKC number (two-digit hexadecimal) of the last virtual volume in the specified
range
•
: CU number (two-digit hexadecimal) of the last virtual volume in the specified
range
•
: LDEV number (two-digit hexadecimal) of the last virtual volume in the specified
range
122 SMI-S provider configuration file