HP XP P9500 Storage - Manual (Page 131)

State after reset Item Window part
GB or Cyl Capacity unit
Default state (*) Setting column
OFF ON/OFF Filter
NA Settings
Closed Open/Closed
Default state (*) Open/Closed Option part Wizard
(*) The default state varies from window to window.
Column Settings window
Table 47 Setting fields in the Column Settings window
Description Item
Changes the selection of the displayed columns to the factory default settings. Restore Default Settings
Selects the columns to display. Checkbox
Click the checkbox next to the name of each column that you want to display. After
making the selections, click OK. Only the columns with checkboxes are selected
are displayed. Columns with checkboxes that are not selected are not displayed.
Note that you cannot select the checkboxes of the columns that must always be
displayed because they are deactivated. If you deselect a checkbox, the filter and
sort settings of that column are released. If you display the column again, you must
set the filter and sort settings again.
Displays the names of the columns in the table. If a column contains two rows, the
name of the upper row is shown on the left of the vertical bar (|). The name of the
lower row is shown on the right of the vertical bar. Column Name
Column Settings window 131