HP XP Continuous Access Software - Manual (Page 41)

Pair status Description Primary
data volume
access
Secondary
data volume
access
PFUL Continuous Access XP Journal monitors the
total amount of data in the journal volume.
If the amount of data exceeds the threshold
(80%), the pair status changes from COPY
or PAIR to PFUL. The write data that inflows
is monitored during the specified time (Data
Overflow Watch). You can use Command
View XP or XP Remote Web Console to set
the monitoring time period (the default is
60 seconds). 1
NOTE:
RAID Manager XP displays the PFUL
status. Command View XP or XP Remote
Web Console displays this status as PAIR.
Read / Write Read Only
PFUS If the time period exceeds the specified
monitoring time period, the pair status
changes from PFUL to PFUS, and the pair
is suspended.
NOTE:
RAID Manager XP displays the PFUS
status. Command View XP or XP Remote
Web Console displays this status as PSUS.
Read / Write Read Only;
Read / Write,
if write option
is enabled
(Disable is the
default).
SSWS Data can be written to the secondary data
volume that is reassigned from the primary
data volume during resynchronization
processing (Takeover).
NOTE:
RAID Manager XP displays the SSWS
status. Command View XP or XP Remote
Web Console displays this status as PSUS
or PSUE.
Read Only Read / Write
Suspending Pair is not synchronized and is in transition
from PAIR or COPY to PSUS/PSUE. When the
split/suspend pair operation is requested,
the status of all affected pairs changes
to Suspending. When the split/suspend
operation is complete, the status changes to
PSUS/PSUE.
Read / Write Read Only
Continuous Access XP Journal user guide 41