HP XP Continuous Access Software - Manual (Page 40)

Pair status Description Primary
data volume
access
Secondary
data volume
access
PSUS (pair
suspended-split)
(see
Table 5 for
split types)
Data volume pair is not synchronized
because you split this pair (pairsplit-r) or
deleted this pair from the secondary array
(pairsplit-S). For Continuous Access XP
Journal pairs, the primary and secondary
arrays keep track of any journal data
discarded during the pairsplit-r operation.
While a pair is split, the primary and
secondary arrays keep track of the updated
primary and secondary data volume tracks.
When you split a pair from the primary
array, the primary array changes the status
of the primary and secondary data volumes
to PSUS. When you split a pair from the
secondary array, the secondary array
changes the secondary data volume's status
to PSUS. The primary array detects this (if
path status is normal) and changes the
primary data volume's status to PSUS.
When you delete a pair from the secondary
array, the secondary array changes the
secondary data volume's status to SMPL.
The primary array detects this (if path status
is normal) and changes the primary data
volume's status to PSUS. You must delete the
pair from the primary array to change the
primary data volume's status to SMPL.
Read / Write Read Only;
Read / Write,
if write option
is enabled
(Disable is the
default).
PSUE (pair
suspended-error)
(see
Table 7 for
suspend types)
Data volume pair is not synchronized
because the primary or secondary array
suspended the pair due to an error condition.
For Continuous Access XP Journal pairs, the
primary and secondary arrays keep track
of any journal data discarded during the
suspension operation. The primary array
keeps track of updated primary data volume
tracks while the pair is suspended.
For Continuous Access XP Journal pairs, if
the secondary array detects a Continuous
Access XP Journal suspension condition (see
Continuous Access XP Journal suspension
conditions ), the primary array changes the
secondary data volume's status to PSUE.
For Continuous Access XP Journal pairs,
if the primary array detects a Continuous
Access XP Journal suspension condition (see
Continuous Access XP Journal suspension
conditions ), the secondary array changes
the secondary data volume's status to PSUE.
The primary array detects this (if path
status is normal) and changes primary data
volume's status to PSUS.
Read/write;
Read only if
fenced.
Read Only
40 Overview of Continuous Access XP Journal