HP XP Continuous Access Software - Manual (Page 112)

Figure 46 Logical paths list and Preset list (delete path operations)
Viewing the status of logical paths
The DKC Status pane displays the status of logical paths.
To view the status of logical paths, the primary and secondary array administrators can perform the
following procedure:
1. Display the DKC Operation pane.
2. In the Switch Display box, select DKC.
3. In the upper-right list, right-click a remote array or logical path.
• To display remote arrays in the list, select Subsystem from the tree.
• To display logical paths between the local and remote arrays, select the remote array
from the tree.
4. Select DKC Status. The DKC Status pane appears.
• If a remote array is selected in the list, the DKC status pane displays all logical paths between
the local and remote arrays and shows the status of each path.
• If a logical path is selected in the list, the DKC status pane displays only the status of the
selected logical path.
5. Check the status of the logical paths, and click Close to close the DKC status pane.
112 Configuring arrays and logical paths