HP XP Continuous Access Software - Manual (Page 206)

NOTE:
If you start the split pair operation with offline backup, but have not yet connected the target file system to
the NAS package at the secondary site, finish connecting the target file system to the NAS Package, and
then start the previously described operations. If you start the split pair operation with online backup, but
do not connect the target file system to the NAS package at the secondary site, finish connecting the
target file system to the NAS Package, and then start the previously described operations (see Splitting
Continuous Access XP Journal volume pairs ).
To delete the Continuous Access XP Journal volume pair in PSUS status without using the S-VOL file system:
1. At the secondary site, terminate the program that accesses the S-VOL.
2. At the secondary site, delete CIFS/NFS shares using the enas_nfsdelete and enas_cifsdelete
commands, and unmount S-VOL using the enas_fsumount command.
NOTE:
When the S-VOL is the file system managed by NAS Sync Image, delete the CIFS/NFS
shares under the differential-data snapshots using the enas_nfsdelete and enas_cifsdelete
commands, unmount the differential-data snapshots using the syncumount command, and
release the differential-data storage devices using the syncstop command.
3. At the secondary site, delete the S-VOL file system using the enas_fsdelete command.
4. At the primary site, delete the Continuous Access XP Journal volume pair.
sudo pairsplit {-g group-name|-d volume-name} -S
5. At the primary site, verify that the Continuous Access XP Journal volume pair has been deleted.
sudo pairvolchk {-g group-name|-d volume-name}
pairvolchk: Volstat is P-VOL.[status = COPY] => Deleting
pairvolchk: Volstat is P-VOL.[status = SMPL] => Deleted
6. At the primary site and the secondary site, stop RAID Manager XP.
sudo horcmshutdown.sh (1-instance configuration)
sudo horcmshutdown.sh 16 17 (2-instance configuration)
NOTE:
If you start the split pair operation with offline backup, but you have not yet connected the target
file system to the NAS package at the secondary site, finish connecting the target file system to the
NAS package, and then start the previously described operations. If you start the split pair operation
with online backup, but you have not yet connected the target file system to the NAS package at the
secondary site, finish connecting the target file system to the NAS package, and then start the previously
described operations (see Splitting Continuous Access XP Journal volume pairs ).
To delete the Continuous Access XP Journal volume pair in a status other than PSUS status:
1. At the primary site, delete the Continuous Access XP Journal volume pair.
sudo pairsplit {-g group name|-d volume name} -S
2. At the primary site, verify that the Continuous Access XP Journal volume pair has been deleted.
sudo pairvolchk {-g group name|-d volume name}
pairvolchk: Volstat is P-VOL.[status = COPY] => Deleting
pairvolchk: Volstat is P-VOL.[status = SMPL] => Deleted
3. At the secondary site, release the device file used in the target file system.
206 Continuous Access XP Journal operations with NAS Blade