Table 38 – HP XP Continuous Access Software User Manual
Page 192

To create the correct RAID Manager XP configuration definition file, HP recommends creating a file system
to be temporarily paired before executing the mkconf.sh command. After creating the RAID Manager XP
configuration definition file using the mkconf.sh command, you can continue using the file system in the
primary site. Alternatively, you can delete it and create a file system with the same configuration using the
same LU in
Create file systems in Continuous Access XP Journal P-VOLs
. You must delete the temporarily
created file system in the secondary site before creating a file system pair.
The following explains how to create a RAID Manager XP configuration definition file in the NAS
package in CL1 in the primary site in the sample configuration above. You must create RAID Manager XP
configuration definition files for the other three NAS packages using the previously explained procedure.
Creating a template for a RAID Manager XP configuration definition file
shows an example of how to create a template for a RAID Manager XP configuration definition
file.
Table 37 Example of mkconf.sh execution results (for instance number 16)
$ cat /home/nasroot/horc_devfile | sudo mkconf.sh -gg VG -i 16 -a
starting HORCM inst 16
HORCM inst 16 starts successfully.
HORCM Shutdown inst 16 !!!
A CONFIG file was successfully completed.
starting HORCM inst 16
HORCM inst 16 starts successfully.
DEVICE_FILE Group PairVol PORT TARG LUN M SERIAL LDEV
/dev/sdj VG VG_000 CL1-A-1 0 17 - 62486 70
/dev/sdk VG VG_001 CL1-A-1 1 18 - 62486 18
?
?
/dev/sdt VG VG_010 CL1-A-1 0 10 - 62486 10
/dev/sdu VG VG_011 CL1-A-1 0 11 - 62486 64
/dev/sdv VG VG_012 CL1-A-1 0 12 - 62486 12
/dev/sdw VG VG_013 CL1-A-1 0 13 - 62486 66
/dev/sdx VG VG_014 CL1-A-1 0 14 - 62486 14
/dev/sdy VG VG_015 CL1-A-1 0 15 - 62486 68
/dev/sdz VG VG_016 CL1-A-1 0 16 - 62486 16
HORCM Shutdown inst 16 !!!
Please check '/home/nasroot/horcm16.conf','/home/nasroot/log16/curlog/
horcm_*.log', and
modify 'ip
_address & service'.
#
Editing the template for the RAID Manager XP configuration definition file
lists the values specified for items included in the RAID Manager XP configuration definition
file in the NAS Blade system.
Table 38 Config. def. file settings (HORCM_MON, HORCM_CMD) & specif. vals.
in NAS Blade sys.
Section name
Item
Specified values in NAS Blade system
ip_address
Unique IP address for eth1 or eth2 in the local NAS package
HORCM_MON
service
20331 (Instance number 16) or 20332 (Instance number 17)
HORCM_CMD
dev_name
/dev/sdf
192
Continuous Access XP Journal operations with NAS Blade