HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 79)

Firmware Download
79 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
4. Enter Y for yes to continue with the reboot, when prompted.
or
Enter the firmwaredownload command to be prompted for parameters.
Example: Displays a “prompted” firmware download.
5. (Optional) Open another telnet session and enter the
firmwaredownloadstatus command to monitor the
firmwaredownload status.
The switch will reboot and start the firmwarecommit after the firmware
is downloaded.
6. Enter the firmwareshow command after the switch reboots and the
firmwarecommit finishes.
The firmware level is displayed for both partitions.
switch:admin> firmwaredownload
Server Name or IP Address: 192.168.166.30
User Name: johndoe
File Name: /pub/dist/system.plist
Password: xxxxxx
Full Install (Otherwise upgrade only) [Y]:
Do Auto-Commit after Reboot [Y]:
Reboot system after download [N]:
Start to install packages......
dir ##################################################
terminfo ##################################################
glibc ##################################################
sin ##################################################
Write kernel image into flash.
file verification SUCCEEDED
Firmwaredownload completes successfully.