HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 64)

Basic Switch Management
64 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Example:
Displaying Whether Track Changes are Enabled
To display the status of the Track Changes feature:
1. Log into the switch as the admin user.
2. At the command line, enter the trackchangesshow command.
The status of the track changes feature is displayed as either on or off. This also
displays whether the track changes feature is configured to send SNMP traps.
Example:
switch:admin> errdump
Error 07
--------
0x17ef (fabos): Mar 24 11:10:27
Switch: 1, Info TRACK-CONFIG_CHANGE, 4, Config file change from
task:TRACKIPC
Error 06
--------
0x4e7 (fabos): Mar 24 11:10:24
Switch: 1, Info TRACK-TRACK_ON, 4, Track-changes on
switch:admin> trackchangesshow
Track changes status: ON
Track changes generate SNMP-TRAP: NO
switch:admin>