HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 54)

Basic Switch Management
54 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Note: System configuration parameters vary depending on switch model and
configuration.
Backing Up the System Configuration Settings
Keep a backup file of the system configuration settings in the event that the
configurations are lost or unintentional changes are made.
System Configurations can be saved through the Fabric OS, or through Fabric
Manager. To back up or restore system configuration settings through Fabric
Manager, refer to the HP StorageWorks Fabric Manager Version 3.0.x User
Guide.
To upload a backup copy of the configuration settings to a host computer:
1. Verify that the FTP service is running on the host workstation.
2. Log into the switch as the admin user.
3. At the command line, enter the configupload command. The command
becomes interactive and you are prompted for the required information.
boot.server.name:host
boot.user:user
diag.loopID:125
diag.mode.burnin:0
diag.mode.burnin.1.name:switchess.sh
diag.mode.burnin.10.name:switchess.sh
diag.mode.burnin.2.name:switchess.sh
diag.mode.burnin.3.name:switchess.sh
diag.mode.burnin.4.name:switchess.sh
diag.mode.burnin.7.name:switchess.sh
diag.mode.burnin.8.name:switchess.sh
diag.mode.burnin.9.name:switchess.sh
diag.mode.burnin.level:0
diag.mode.esd:0
diag.mode.lab:28
switch:admin>