beautypg.com

Deleting a wwn from the access control list – HP StorageWorks MSA 2.8 SAN Switch User Manual

Page 130

background image

The SAN Management Application

130

Fabric OS Procedures Version 3.1.x/4.1.x User Guide

Deleting a WWN from the Access Control List

To delete a WWN from the ACL:

1. Log into the switch as the admin user.

2. Enter the

msconfigure

command at the command line. The command

becomes interactive.

MS Access List consists of (13): {

20:00:00:20:37:65:ce:aa

20:00:00:20:37:65:ce:bb

20:00:00:20:37:65:ce:ff

20:00:00:20:37:65:ce:11

20:00:00:20:37:65:ce:22

20:00:00:20:37:65:ce:33

10:00:00:60:69:04:11:24

10:00:00:60:69:04:11:23

21:00:00:e0:8b:04:70:3b

10:00:00:60:69:04:11:33

20:00:00:20:37:65:ce:55

20:00:00:20:37:65:ce:66

00:00:00:00:00:00:00:00

}

0 Done

1 Display the access list

2 Add member based on its Port/Node WWN

3 Delete member based on its Port/Node WWN

select : (0..3) [1] 0

done ...

Update the FLASH? (yes, y, no, n): [yes] y

*Successfully saved the MS ACL to the flash.

switch:admin>