HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 215)

Troubleshooting
215 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
5. Enter the portFlagsShow command to see how a port has logged in and
where a login failed, if a failure occurred.
Example:
6. Enter portlogdumpport [, saved[, portid]]
View the device to switch communication.
Example:
13: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT SEGMENTED CBL_LB L
OGIN LED
14: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT SEGMENTED CBL_LB L
OGIN LED
15: Online In_Sync PRESENT ACTIVE F_PORT L_PORT U_PORT LOGIN NOELP LED AC
CEPT
16: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT SEGMENTED CBL_LB L
OGIN LED
switch:admin> portlogdump 41
time task event port cmd args
-------------------------------------------------
16:44:21.490 PORT Rx 41 40
02fffffd,00fffffd,0005ffff,14000000
16:44:21.490 PORT Tx 41 0 c0fffffd,00fffffd,00050541
16:44:32.503 PORT Tx 41 40
02fffffd,00fffffd,0542ffff,14000000
16:44:32.506 PORT Rx 41 0 c0fffffd,00fffffd,05420006
16:44:35.993 PORT Rx 5 40
02fffffd,00fffffd,0a49ffff,14000000
16:44:35.993 PORT Tx 5 0 c0fffffd,00fffffd,0a490543
16:44:35.997 PORT Tx 5 40
02fffffd,00fffffd,0544ffff,14000000
16:44:36.000 PORT Rx 5 0 c0fffffd,00fffffd,05440a4a
16:44:42.340 PORT Rx 41 40
02fffffd,00fffffd,0009ffff,14000000
16:44:42.340 PORT Tx 41 0 c0fffffd,00fffffd,00090545
switch:admin>