HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 59)

Basic Switch Management
59 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Example:
Configuring the Policy Threshold Values
To set the switch status policy threshold values:
1. Log into the switch as the admin user.
2. Enter the switchstatuspolicyset command at the command line.
First, the current switch status policy parameter values are displayed, then you
are prompted to enter values for each DOWN and MARGINAL threshold
parameter:
— Enter the number of faulty ports required to change the switch status to
DOWN and click Enter.
— Enter the number of faulty ports required to change the switch status to
MARGINAL and click Enter.
— Enter the number of missing GBICs required to change the switch status
to DOWN and click Enter.
— Enter the number of missing GBICs required to change the switch status
to MARGINAL and click Enter.
— Enter the number of bad Power Supply warnings required to change the
switch status to DOWN and click Enter.
— Enter the number of bad Power Supply warnings required to change the
switch status to MARGINAL and click Enter.
switch:admin> switchstatuspolicyshow
The current overall switch status policy parameters:
Down Marginal
----------------------------------
FaultyPorts 2 1
MissingSFPs 0 0
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
PortStatus 0 0
ISLStatus 2 1
switch:admin>