HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 206)

Troubleshooting
206 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
5. Chose the fabric on which to change the duplicate Domain ID; log into the
conflicting switch in that fabric.
6. Enter the switchdisable command.
7. Enter the switchenable command.
This will enable the joining switch to obtain a new Domain ID as part of the
process of coming online. The fabric principal switch will allocate the next
available Domain ID to the new switch during this process.
8. Repeat steps 5 through 7 if additional switches have conflicting Domain IDs.
Zoning Setup Issues
The following sections cover various sources of zoning setup issues.
Zoning Related Commands
Table 14: Zoning Related Commands
Command Function
switchshow Displays currently enabled configuration and any E_port
segmentations due to zone conflicts.
licenseshow Displays current license keys and associated (licensed)
products.
Table 15: Zone Specific Commands
Command Function
cfgcreate Use to create a zone configuration.
cfgshow Displays zoning configuration.
zoneadd Use to add a member to an existing zone.
zoneshow Displays zone information.
zonecreate Use to create a zone. Before a zone becomes active, the
zonesave
and
cfgenable
commands must be used.
alicreate Use to create a zone alias.
alidelete Use to delete a zone alias.
zonehelp Displays help information for zone commands.