Displaying the error log without page breaks – HP StorageWorks MSA 2.8 SAN Switch User Manual

Page 166

Diagnostics and Status

166

Fabric OS Procedures Version 3.1.x/4.1.x User Guide

■

Options are provided to the

errdump

command to display three options: all

the errors (previous persistent log and the current run-time log), only errors
from the current run-time cycle, or the errors from the persistent error log.

■

Options are provided to clear the persistent error log. (

errclear

–p).

Note:

Only the persistent log can be resized. The run-time error log cannot be resized.

Displaying the Error Log Without Page Breaks

To display the switch error log all at once:

1. Log into the switch as the admin user.

2. Enter the

errdump

command at the command line.

Example:

switch:admin> errdump

Error 04

--------

0x576 (fabos): Nov 25 08:26:44 (1)

Switch: 1, Info TRACK-LOGIN, 4, Successful login

Error 03

--------

0x576 (fabos): Nov 24 16:01:44 (12)

Switch: 1, Info TRACK-CONFIG_CHANGE, 4, Config file change from task:ZNIPC

Error 02

--------

0x2f0 (fabos): Nov 24 15:07:01

Switch: 1, Warning FW-STATUS_SWITCH, 3, Switch status changed from
HEALTHY/OK to

Marginal/Warning