HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 131)

The SAN Management Application
131 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
3. At the select prompt enter 3 to delete a member based on its Port/Node WWN.
4. At the prompt enter the WWN of the member you would like to delete from
the ACL. Press the Return key, and the main menu is displayed.
5. At the prompt enter 1 to verify the WWN you entered was deleted from the
ACL.
6. Once you have verified that the WWN was deleted correctly, enter 0 at the
prompt to end the session.
7. At the Update the FLASH? prompt enter Y .
8. Press Enter to update the flash and end the session.
Example:
switch:admin> msconfigure
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 2
Port/Node WWN (in hex): [00:00:00:00:00:00:00:00]
*WWN is successfully added to the MS ACL.
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [2] 1
<< Continued on next page.>>