HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 224)

Troubleshooting
224 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
8. Determine if any of the following statistic error counters are non-zero:
ENC_in, CRC_err, TruncFrm, FrmTooLong, BadEOF, Enc_out,
BadOrdSet, DiscC3.
9. Determine if the transmit, receive, or class 3 receiver counters are stuck at a
value.
10. Determine if the number of frames transmitted is not equal to the number of
frames received.
11. Repeat steps 3 through 11 for all L-ports present until:
a. the number of frames requested is reached
b. all ports are marked bad
12. Look for errors. See the following list for possible errors.
Possible Errors
One or more of the following errors may appear if failures are detected. Refer to
the HP StorageWorks Diagnostic and System Error Message Version 3.1.x/4.1.x
Reference Guide to find details and actions for any errors that appear.
DATA
INIT
PORT_DIED
EPI1_STATUS_ERR
ERR_STAT
ERR_STATS_2Long
ERR_STATS_BADEOF
ERR_STATS_BADOF
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
ERR_STAT_2LONG
ERR_STAT_BADEOF
ERR_STAT_BADOS