HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 163)

Diagnostics and Status
163 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
There are two basic modes in which diagnostics can be manually run; they are
normal interactive mode and burnin mode. Burnin mode has additional control
commands for its operation.
Diagnostics are also executed in the power-on self test (POST) operation, but do
not require user command input. They are automatically activated when Field
Replaceable Units (FRUs) are brought online.
The following lists diagnostic test commands (refer to the HP StorageWorks
Fabric OS Version 3.1.x/4.1.x Reference Guide for more information):
■ portregtest
■ sramretentiontest
■ spinfab
■ crossporttest
■ portloopbacktest
■ backport
■ cmemretentiontest
■ cmitest
■ statstest
■ portledtest
■ filtertest
The following test commands are run during POST:
■ turboramtest
■ centralmemorytest
■ cmitest
■ camtest
■ txdpath
■ spinsilk
■ backplanetest
Diagnostic control commands:
■ diagenablepost
■ diagdisablepost
■ diagmodeshow