Agilent Technologies N2620A - Manual (Page 87)

Network Testing with the FrameScope Pro 2
N2620A User’s Guide 69
2 There are two options to search for the slave FrameScope
Pro.
Option 1: If you do not know the MAC address, IP address, or
name of the slave FrameScope Pro, select Search for
FrameScope
to enable autosearch.
Option 2: For the MAC Loopback test, if the MAC address of
the slave FrameScope Pro is known, clear Search for
FrameScope
and type in the MAC address. Similarly, for the IP
Loopback test, if the IP address or name of the slave
FrameScope Pro is known, type in the IP address or name.
3 Press Start or press on the MAC or IP Loopback
menu to begin the test.
The FrameScope Pro will search for the slave FrameScope
Pro on the network and report back the link results.
Search results displays
the MAC address and
the current MAC
loopback test results.
Press Interval to type
in the interval time (in
seconds) for the start
time of a transmitted
frame to the start time
of next transmitted
frame of the master
FrameScope Pro.
Press Save to save
the current test
results.
Option 1
: Select Search
for FrameScope
to
automatically locate the
slave FrameScope Pro
within the network.
Option 2
: Clear Search
for FrameScope
and
type in the MAC
address of the slave
FrameScope Pro.