Agilent Technologies N2620A - Manual (Page 26)

8 N2620A User’s Guide
1 Introducing the FrameScope Pro
Inspection and Maintenance
Initial Inspection
AC power supply requirements
The provided AC adapter accepts an input voltage between 90 V
and 240 V with a line frequency between 50 Hz to
60 Hz ± 5%. The AC adapter provides an output of 12 VDC, 1.5 A
with a ferrite core clamp.
Line power cable
The type of power cable shipped with each FrameScope Pro
depends on the country of destination.
WA R N I N G
To avoid the possibility of injury or death, you must observe the following
precautions before switching on the FrameScope Pro.
• If the FrameScope Pro is to be powered via a step-down transformer,
ensure that the common terminal connects to the earth pole of the
power source.
• Only insert the power cable plug into a socket outlet with a protective
earth contact. Do not use an extension cord without a protective
conductor.