Agilent Technologies N2620A - Manual (Page 58)

40 N2620A User’s Guide
2 Network Testing with the FrameScope Pro
Setting Up an FTP server
1 Press Autotest on the Main Menu to display the Network
Autotest Setup screen.
• If the FTP server you wish to test is in the list of available
servers, select it, and press Edit.
• If the server to be tested is not in the list.
a Press Add to add a new server to the Autotest suite.
b Select FTP Server in the list.
c Enter the information for the server. Press Next.
d Enter information about the file operations. When
Read
or Write operation is selected, the optional Delete
operation will be available. Separate directories and
filenames can be specified for the Read, Write, and
Delete
operations. Press Next.
2 Press OK.
3 Press Start Test to begin the test.