Agilent Technologies N2620A - Manual (Page 205)

System Operations 7
N2620A User’s Guide 187
(if required). If the FTP server requires FTP Authentication,
type in the user name and password. If authentication
information is not entered, the FrameScope Pro will attempt
to connect to the FTP server as an “anonymous” user.
4 Type in the address for the Suite Path which includes the
filename of the test suite to be downloaded. The test suite
filename must have a valid prefix as shown in the table
below.
5 Press OK to start the download.
• If there are invalid entries or the CompactFlash card is
missing, a warning message window will appear. If all
entries are correct and the CompactFlash card is
available, a message box appears to confirm the start of
the download process.
• A notification window appears when the download has
completed, or if a failure happens during the download.
• If a test suite with the same profile name already exists,
you will be prompted to allow overwriting the existing
profile. If you choose not to overwrite the existing profile,
the downloaded test suite is aborted.
After pressing OK following a successful download, you are
returned to the System Settings Network screen. To verify that
the download was successful, enter the setup dialog of the
related test and press Suite. The downloaded test suite should
appear under its profile name in the listing of available test
suites.
Test Suite type Destination Test Suite filename prefix
Autotest WSData1.0\ntst ntst
Aux Port Setting WSData1.0\aux_suite aux_suite
DSL test WSData1.0\dsl_tst dsl_tst
PERT WSData1.0\pert_tst pert_tst
RFC 2544 WSData1.0\ltst ltst
Routing Table Setting WSData1.0\routingtbl_suite routingtbl_suite
Test Port Setting
WSData1.0\net_suite net_suite
Traffic Gen WSData1.0\tg_tst tg_tst
Video Test WSData1.0\iptv_test iptv_tst
VoIP (Megaco) test WSData1.0\megaco_tst megaco_tst
VoIP (SIP) test WSData1.0\vtst vtst