Setting up the slave, Framescope pro for rfc 2544 tests – Agilent Technologies N2620A User Manual
Page 80
62
N2620A User’s Guide
2
Network Testing with the FrameScope Pro
Setting Up the Slave FrameScope Pro for RFC 2544 Tests
1
Press System on the Main Menu screen.
2
Select RFC 2544 Test on the System Settings Network menu
and press Edit.
3
Select Enable RFC 2544 Test. You may set a password in the
slave FrameScope Pro to enable the master FrameScope Pro
login. Press OK.
The slave FrameScope Pro is now ready to perform the RFC
2544 tests. Do not run other tests on the slave FrameScope
Pro while the RFC 2544 tests are running.
See also other documents in the category Agilent Technologies Hardware:
- HP 16500B (38 pages)
- E4400-60230 (18 pages)
- Option H48 Multiport Test Set Z5623A (138 pages)
- hard disk drive kit e5052-90202 (13 pages)
- FIXTURE U7242A (10 pages)
- FS2010 (36 pages)
- USB/GPIB Interface Converter 82357A (70 pages)
- 34399A RS-232 (3 pages)
- 1100 Series (28 pages)
- N9340A (161 pages)
- HSSI WanProbe J3916A (179 pages)
- 37907A (16 pages)
- N1022A (24 pages)
- Agilent E6474A (184 pages)
- 82357B (34 pages)
- Agilent E1345A (5 pages)
- 85225F (148 pages)
- 8510C (16 pages)
- Wireless Network Optimization Platform E6474A (194 pages)
- J3919A (189 pages)
- AGILENT U2761A (123 pages)
- 85032B/E 50 (55 pages)
- 8510 (32 pages)
- J6800A (16 pages)
- E6474A (14 pages)
- N2610A (248 pages)
- N6314A (7 pages)
- 85107B (20 pages)
- 8753ET (28 pages)
- N9360A (44 pages)
- Agilent 82350B (51 pages)
- Agilent 4396B (124 pages)
- LXI (8 pages)
- E1439 (246 pages)
- U2802A (67 pages)
- Agilent Hard Disk Drive Kit E5071BU (12 pages)
- U2781A (47 pages)
- E1301B (244 pages)
- Multiple Channel Controller 85330A (166 pages)
- E6701A (32 pages)
- E5810A (159 pages)
- E5805A (47 pages)