Rfc 2544 test – Agilent Technologies N2620A User Manual
Page 211
System Operations
7
N2620A User’s Guide
193
RFC 2544 Test
Two FrameScope Pro units or one FrameScope Pro and a
loopback device are needed for the RFC 2544 tests: round-trip
latency test, point-to-point throughput test, frame loss rate
tests, and back-to-back tests. One FrameScope Pro will be the
master and the other the slave (if two FrameScope Pro units are
used), which are placed in the network-point-under-test. The
slave FrameScope Pro has to be preset for the RFC 2544 tests.
The RFC 2544 Test Slave Setup screen allows you to enable the
FrameScope Pro to take the part as the slave device in RFC 2544
tests.
A password can also be assigned for extra security.
, “Setting Up the Slave FrameScope Pro for
RFC 2544 Tests” on page 62 for the procedure to set up the slave
FrameScope Pro.
- HP 16500B (38 pages)
- E4400-60230 (18 pages)
- Option H48 Multiport Test Set Z5623A (138 pages)
- hard disk drive kit e5052-90202 (13 pages)
- FIXTURE U7242A (10 pages)
- FS2010 (36 pages)
- USB/GPIB Interface Converter 82357A (70 pages)
- 34399A RS-232 (3 pages)
- 1100 Series (28 pages)
- N9340A (161 pages)
- HSSI WanProbe J3916A (179 pages)
- 37907A (16 pages)
- N1022A (24 pages)
- Agilent E6474A (184 pages)
- 82357B (34 pages)
- Agilent E1345A (5 pages)
- 85225F (148 pages)
- 8510C (16 pages)
- Wireless Network Optimization Platform E6474A (194 pages)
- J3919A (189 pages)
- AGILENT U2761A (123 pages)
- 85032B/E 50 (55 pages)
- 8510 (32 pages)
- J6800A (16 pages)
- E6474A (14 pages)
- N2610A (248 pages)
- N6314A (7 pages)
- 85107B (20 pages)
- 8753ET (28 pages)
- N9360A (44 pages)
- Agilent 82350B (51 pages)
- Agilent 4396B (124 pages)
- LXI (8 pages)
- E1439 (246 pages)
- U2802A (67 pages)
- Agilent Hard Disk Drive Kit E5071BU (12 pages)
- U2781A (47 pages)
- E1301B (244 pages)
- Multiple Channel Controller 85330A (166 pages)
- E6701A (32 pages)
- E5810A (159 pages)
- E5805A (47 pages)