Agilent Technologies N2620A - Manual (Page 76)

58 N2620A User’s Guide
2 Network Testing with the FrameScope Pro
The Latency Settings screen
The Latency test automatically
uses values set for the
Throughput test.
If a frame length is set for the
throughput test, this cannot be
changed for the latency test.
Specify the upstream and
downstream utilization rates
when performing the Latency
test.
For half duplex networks, you
can only specify the utilization
for one direction.
Specify the number of
round-trips for the test
Adjust the duration to load
the device-under-test
sufficiently for better results
Specify the frame length or
select Full Range to collect all
frame lengths