beautypg.com

Remote control – Agilent Technologies N2620A User Manual

Page 259

background image

Network Performance Analyzer Reference

8

N2620A User’s Guide

241

Remote Control

A web server is implemented in the FrameScope Pro to provide
the means to control and monitor the FrameScope Pro using a
web browser.

To use the web server, the web server must first be enabled in
the FrameScope Pro.

1

Press System to call the System Settings Network screen.

2

Select Remote Control and press Edit Settings on the System
Settings Network screen.

3

Select Enable Web Server to enable the web server in the
FrameScope Pro.

Note the port ID, either the test port or auxiliary port, on
which the web server is running.

4

The web server can now be connected to from the web
browser by entering the IP address of the port in the form of
http://141.x.x.x

.

See also other documents in the category Agilent Technologies Hardware: